GEPRC TAKER F722 BLS 65A V2 STACK
STACK
₹8999.00₹8499.00
Features
Uses the mainstream STM32F722 chip
Equipped with the latest 42688-P gyroscope
16M onboard black box storage
Integrated LC filter
Upgraded Type-C USB interface
Directly plugs into the DJI Air Unit
Paired with the TAKER H65_8S_BLS 65A 4IN1 ESC, providing a smooth flying experience
Simple and efficient installation method with shock absorbers for stable gyroscope performance
Dual independent BECs: 9V@2.5A and 5V@3A
Specifications
GEP-F722-HD v2 Flight Controller
MCU: STM32F722
IMU: ICM42688-P(SPI)
Air Unit Connection: Direct plug-in to DJI Air Unit
Black Box:16M onboard
USB Interface: Type-C
Barometer: supported
OSD: BetaFlight OSD w/ AT7456E chip
BEC: 5V@3A,9V@2.5A dual BEC
Firmware Target: GEPRCF722
Dimension: 36.85×36.85mm, mounting hole size 30.5×30.5mm，φ4mm hole becomes φ3mm after using a silicone shock-absorbing circle.
Input Voltage: 3-6S LiPo
UART: 5
Power Filter: Integrated LC filter
Weight: 8.1g
TAKER H65_8S_BLS 65A 4IN1 ESC
Input Voltage: 3-8S Lipo
Ammeter: Supported
Continuous Current：65A
Burst Current：70A（5 seconds）
Support Protocol: Dshot 150/300/600
Dimension：42×45.7mm,mounting hole size30.5×30.5mm，φ4mm hole becomes φ3mm after using the silicone shock-absorbing ring.
Weight: 14.9g
Firmware Target: B_X_30
Includes
1 x FC board
1 x ESC board
1 x Capacitor
1 x DJI Air Unit adapter cable
1 x Flight controller adapter cable
1 x XT60 power cable
4 x M3*30 screws
4 x M3*25 screws
8 x Nylon nuts
8 x Silicone anti-shake pads
2 x sh1.0 4pin silicone cable
1 x Camera connection cable
